Researchers successfully fabricate magneto-optical ceramics

A team of material scientists led by Jiang Li from Shanghai Institute of Ceramics, Chinese Academy of Sciences, in Shanghai, China recently reported (Tb_1-xY_x)₃Al₅O₁₂ magneto-optical ceramics with high optical quality. The optical transmittance, microstructure, Verdet constant, and thermal conductivity of (Tb_1-xY_x)₃Al₅O₁₂ with different Y content were investigated in detail.

It was found that Y₂O₃ can suppress the secondary phase and improve the optical quality of TAG ceramics. As optical quality occupies one of the most important parts of the practical performance of magneto-optical ceramics, Y₂O₃ is considered to be a promising and effective additive.

The team published their research article in Journal of Advanced Ceramics on April 30, 2024.

In high-performance laser devices, Faraday isolators are one of the important components that can prevent the front-end system from disturbance and damage caused by a back-reflected beam. Magneto-optical materials are thus widely studied as they are key elements of Faraday isolators.

Among magneto-optical materials applied in the visible to near-infrared wavelength band, TAG ceramics have been considered to be one of the most promising materials thanks to their high Verdet constant and good thermo-optic properties. However, the manufacturing process of TAG ceramics should be further optimized to reduce the optical loss and make them applicable for practical use.

Optical scattering from the secondary phases is one of the most important problems for TAG ceramics, originating from the narrow solid-solution range. Based on the existing problems and difficulties of TAG ceramics, the research team proposed their own solutions.

“As Y³⁺ has a smaller ionic radius compared with Tb³⁺, anti-site defect can more easily form after Y substitution in TAG, which implies a possibility of increasing the solid-solution range, suppressing the secondary phases, and improving the optical quality of TAG ceramics,” said Jiang Li, senior author of the research paper, vice director of the Transparent Ceramics Research Center, Shanghai Institute of Ceramics, Chinese Academy of Sciences. Dr. Li is also a professor in Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences.

“In this work, Y₂O₃ was added in various amounts as an additive to investigate the mechanisms leading to improvement of the optical quality of TAG ceramics. (Tb_1-xY_x)₃Al₅O₁₂ (x=0, 0.05, 0.1, 0.2, 0.3) ceramics were fabricated by solid-state reaction sintering. Vacuum sintering combined with hot isostatic pressing (HIP) post-treatment was conducted. The crystal structure, microstructure, optical transmittance, Verdet constant, and thermal properties for obtained ceramics were investigated in details,” Jiang Li said.

The result is that Y₂O₃ improves the optical transmittance of the ceramics by suppressing the secondary phase, probably due to the increase of solubility.

“The (Tb_0.8Y_0.2)₃Al₅O₁₂ ceramics possess the highest in-line transmittance value in this work, which is 82.9% at 1064 nm and 82.2% at 633 nm. The optical loss of the (Tb_0.8Y_0.2)₃Al₅O₁₂ ceramics is nearly one order of magnitude lower than that of the obtained TAG ceramics in this work and in our previous works, showing that adding Y₂O₃ is a suitable method for improving the optical quality of TAG ceramics,” said Jiang Li.

The research team also found the side-effects caused by Y substitution. “Y₂O₃ additive reduces the Verdet constant of (Tb_1-xY_x)₃Al₅O₁₂ ceramics as Y³⁺ substitutes Tb³⁺ thereby directly reducing the concentration of paramagnetic ions. And after adding 20 at.% Y, the thermal conductivity of the TAG ceramics decreases by 9.4% in this work,” said Jiang Li.

After considering the factors comprehensively, the research team makes the assessment. Jiang Li said, “The optical loss directly affects the extinction ratio, insertion loss, change of beam quality, and many other performances for Faraday isolators, so it is one of the most concerned properties for magneto-optical ceramics. Therefore, Y₂O₃ can be preliminarily considered to be a promising and effective additive for improving quality of TAG ceramics for magneto-optical applications.”

In the future, the research team will further reduce the optical loss coefficient and fabricate the (Tb_1-xY_x)₃Al₅O₁₂ ceramics with larger aperture and thickness.

The other contributors include Lixuan Zhang, Dianjun Hu, Xiao Li, Ziyu Liu, Chen Hu, Lexiang Wu, and Tingsong Li from the Transparent Ceramics Research Center at Shanghai Institute of Ceramics, Chinese Academy of Sciences in Shanghai, China; and Dariusz Hreniak from the Institute of Low Temperature and Structure Research, Polish Academy of Sciences in Wroclaw, Poland.